Chicken tractor 11 of 17
Cut 2: 1x3's 56" long, center them on the 20: mark and attach.
Mark all 4 boards on the tractors front 21" and 46" from the top of the cross piece.
When you attach the cross pieces attach them BELOW the marked lines.
Cut 2: 1X3's 33 " long
Cut 2: 1X3's 20" long.
Attach the 33" boards on the bottom mark, leave 1 1/2" on the door board, this is so the door will fit flush.
Attach the top 2 boards in the same manner.
Mark all 4 boards on the tractors front 21" and 46" from the top of the cross piece.
When you attach the cross pieces attach them BELOW the marked lines.
Cut 2: 1X3's 33 " long
Cut 2: 1X3's 20" long.
Attach the 33" boards on the bottom mark, leave 1 1/2" on the door board, this is so the door will fit flush.
Attach the top 2 boards in the same manner.
posted by Footsteps Farm | 4:01 PM
0 Comments:
Post a Comment
<< Home